Commercial gas cooktops are a crucial piece of appliance in most high-profile kitchens. Companies design them to be long-lasting, effective, and trustworthy. But like any product or equipment, they can face issues from time to time. You can save time & money by knowing how to resolve problems with your titular device. It also confirms that your pantry is working smoothly. This article will explore the most common issues that these stylish products face. You will also get knowledge on how to resolve them.
Burners Not Lighting
If your gas is not lit, you should check the gas supply first. Ensure that you open the gas valve and that the gas is streaming. If the gas supply is not the issue, take a look at the ignition system. One should also check the electrode, spark module and wiring for rust or damage. You may need to change the ignition system if it is ruined or rusted.
Gas Smell around the Device
Quick action is essential if you smell gas around your commercial gas cooktop. It is hazardous to have a gas leak in your kitchen. So always switch the gas supply valve off and aerate the location by opening windows. Then, try to find the source of the gas leak. It could be a faulty valve or gas line. In either situation, you should call a technician to resolve the problem.
Igniter Won't Stop Clicking
Many times the igniter on your commercial gas cooktop won't stop clicking. It could be due to moisture or dirt on the igniter. Try cleaning the igniter with a toothbrush. Once done, let it dry completely before using it again. If this method doesn't work, then you may need to replace the igniter. For further information, visit the leading commercial gas cooktop suppliers in Melbourne & Sydney.
The Pilot Light Won't Stay On
If the pilot light on your classy device won't stay on, there could be many reasons for it. First, review to ensure that the gas supply switch is open. If it is, the problem may be a filthy or faulty thermocouple. You can use a toothbrush to try to clean the thermocouple. If necessary, you can also replace it.
Burner Flames are Uneven
Several things can cause uneven flames. The cooker cap is the first thing you should verify. Ensure that you position it correctly and that there are no roadblocks. If the burner cap is not the problem, check the oven ports for clogs or obstructions. Use a wire brush to clean out any debris that may be blocking the ports. If the heater ports are clean, there may be a gas pressure regulator issue. Have a professional technician check the regulator. The procedure is essential to confirm that it is working adequately.
Burner Flames are Yellow
Yellow flames are a sign of incomplete combustion in a commercial gas cooktop. You can encounter it through many issues. The first thing to check is the air shutter. Make sure that it is properly adjusted to allow enough air into the heater. The burner ports may be clogged or obstructed if the air shutter is not the problem. Clean the oven ports with a wire brush to ensure they are clear. If the burner ports are clear and the air shutter is adjusted correctly, the problem may be with the gas supply. Have a professional technician check the gas pressure to ensure it is correct.
Burner Spark is Too High or Low
If the burner spark is too high or low, the primary thing to do is to verify the gas pressure. Ensure that the pressure is within the supplier's prescribed limits. Check the oven openings for blockage if the gas pressure is within limits. Clean out any residue that may be clogging the openings using a wire brush. If the openings are clean and the gas pressure is precise, the gas valve may be creating the problem. Have a certified professional look at the gas valve. The method helps verify that it is working correctly.
Difficulty in Turning Burner Knobs
If you are facing difficulty turning the burner knobs, you should first look at the knob itself. Ensure that you have aligned it and that there are no roadblocks. If this component is not the issue, damage or corrosion of the valve stem may be the reason. Contact a certified commercial gas cooktop supplier in Brisbane & Perth to look at the valve stem to check that it is okay.
You need some knowledge & expert guidance to resolve the issues with these products. You can identify and solve many oven issues using the above steps. But, many companies need to be more suspicious about any of the resolving steps. So, if the issue continues, reaching out to a professional individual is always better. They can check and repair any problems with your cooktop. They will also ensure that it is functioning correctly.
Published on: Apr 25, 2023
Visits: 133